Fandom

Wikianswers

Welcome! Enter your question below. Please use words like "Who, What, Where, When, Why, How, etc..." in your question. Nothing to ask? Click here for a random, un-answered question.

How do you change a fuel filter on 1995 k1500 chevrolet suburban?

1,033,218questions on
Wikianswers
Add New Page
Talk0 Share

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.

first you would open the gas cap to relieve pressure from tank. then under the hood you need to fine the pressure value for the fuel line and release that pressure as well once the pressure is out you will have to remove the two bolt screws ateach end of the filter. have extra rags and something to catch the excess fuel. the fuel line on the engine side of the filter is held in place in a plastic snap fitting. unsnap it and the line can be moved out of the way to remove the filter. then replace and go in reverse to install new one. about 30 minutes to change. dont change filter often you could damage the pump or O2 sensors.

Also on Fandom

Random Wiki